Industry 101 7.6 Chen Gao

Industry 101 | Smart Meter: Impact in Legacy Utilities Systems

Industry 101

This post is part of our Industry 101 Series, an ongoing campaign to provide a foundation of knowledge about our unique industry. To learn more about this campaign, please click here.

 

7.6 SMART METER IMPACT IN LEGACY UTILITIES SYSTEMS

7.6.1 Outage Management System

The most definitive characteristic of a smart grid is the ability to share near real-time data throughout the enterprise. Then, this gathered information is further shared across other smart grid information systems to deliver operational and business benefits to the utility. The deployment of advanced metering infrastructure is a prime demonstration of smart grid infrastructure that enables this type of interoperability.

Many utilities have already accomplished interfacing AMI with a meter data management (MDM) solution that automatically validates, edits, and estimates meter readings, streamlines billing processes, and supports beneficial rate designs. Now, industries with AMI are looking for ways to integrate MDM with outage management systems (OMS.) By

Power Outage Map Seattle

implementing this, utilities may obtain operational intelligence that allows more efficient and accurate outage detection, restoration, and verification.

 

7.6.1.1 OUTAGE DETECTION

Prior to smart meters and more advanced technology, the biggest input to OMS was customer phone calls, e.g. “My lights are out.” But in general, less than 20% of affected customers will report an outage for a variety of reasons – for example, not being home, or assuming that the outage has already been reported by others. The integration of AMI and OMS allows utilities to be very accurate in defining the impacts of a power outage, which leads them to employ proactive communications systems – telling the customer about a power problem instead of the customer telling the utility.

This level of customer notification service is taken for granted in industries such as travel (“Your flight is delayed”) and banking (“Your monthly statement is ready.”) Seeing customers translate these same expectations of service to utilities is not surprising. Access to smart devices is expanding rapidly for customers, as is their thirst for information. A customer’s ability to access information during a power outage is increasingly based on channels including text messaging, websites, and smart phone applications. By offering better information on a variety of channels during a power outage, utilities can proactively reach out to all affected customers and provide the latest updates on power problems, while increasing customer satisfaction in the long run.

While consumer-reported events must be tracked and managed by OMS, AMI event reporting is more immediate, reliable, and available. An OMS can quickly leverage this information using the tracing and prediction analysis functions of a real-time operations distribution network model to determine the location and hierarchy of the affected devices and faults. AMI cannot do this on its own since the topologies of AMI communication networks have no knowledge of the power distribution network beyond the relationship of a meter to a customer’s service point and premise. Leveraging the utility’s geographic information systems (GIS), the OMS can accurately maintain the current state of the network and provide users with a geospatial view of network activity.

 

7.6.1.2 OUTAGE RESTORATION

Smart meter sends a last gasp message to the utility’s OMS system before the meter loses power. Not all last gasp messages make their way to the OMS, but usually enough messages are received to help the utility adequately determine which customers and areas are affected. This outage event data can increase the accuracy of outage predictions and help utility personnel to promptly and accurately react to power failures. The end result is that utilities operate more efficiently, field activities are assigned to the repair crews more accurately, and customers can get back to their normal life more quickly, all at a lower cost.

During major power issues prior to smart meter technology, it was common for utilities to dispatch crews to restore service to a customer whose service had already been

Meters

restored or had never had problems that required a field visit. Utilities maximize the value of smart meters for service restoration through automated integration with AMI and OMS. This integration provides utility personnel the ability to visualize the full scope of damage, locate the area, prioritize work order, and then pass information to appropriate crews with essential details before dispatching them for restoration.

In addition, the OMS interfaced with the AMI allows automatic or manual pinging of meters. While the response time of a ping request is variable, utilities using this functionality experience significant savings by validating events, eliminating unnecessary truck rolls, and consequently making more efficient use of crews.

 

7.6.1.3 OUTAGE VERIFICATION

Another benefit of integration of AMI and OMS is verification of power restoration. Restoration verification is accomplished when a meter reports in with normal usage data after being reenergized. This provides automated and positive verification that affected customers have been restored, no nested outages are detected, and associated outage events as well as work orders are closed before restoration crews leave the area.

Similarly, pinging meters remotely to validate restoration helps identify any residual or nested outages resulting from multiple faults downstream of a specific device. The OMS prediction engine performs the business logic required to create new incidents for the existing nested outages.

Endpoint Power Restore

Identifying nested outages while restoration crews are on site eliminates the associated customer callbacks, customer service costs, and

most importantly, duplicate trips to the field.

With outage causes identified and isolated more quickly, the synergy of integrated AMI and OMS brings all the advanced tools and functions needed to reduce outage duration and cost due to faster response and restoration.

 

7.6.1.4 AMI LEADS TO INTEGRATION WITH NMS/OMS

Most meters used in advanced metering infrastructure (AMI) systems have a last-gasp capability, which is a high-priority message transmitted by the meter that service is out. With a large outage, the last-gasp functionality can overwhelm an AMI system because of message collisions in the communication network.

New AMI technology is able to overcome such problems. Some AMI systems do not just send a single last-gasp. Rather, they send a series of “power out” status messages, which are device outage events. Some mesh networks also combine outage information. As a result, instead of having countless distinct outage messages, a utility might only have a packet with outage information. The same amount of information makes its way through the network, but more efficiently. Furthermore, some AMI systems have the ability to filter or throttle the amount of outage information that is making its way to the OMS so that it doesn’t overwhelm the OMS.

 

7.6.1.5 BENEFITS OF INTEGRATION WITH NMS/OMS

Integration with NMS and OMS is revolutionizing how utilities deal with outage activity. Increased customer satisfaction and decreased costs to restore power is the ultimate goal of utilities when it comes to outage management. This goal can be achieved from multiple perspectives.

  • Improved device prediction accuracy by using meters to verify outages in a timely manner. Ideally, the OMS will identify and validate an outage before the first customer calls to report the outage. The interactive voice response (IVR) should notify the customer that the utility is aware of the outage and responding. This leads to improved customer satisfaction.
  • Improved crew management and utilization by reducing the crew effort required to return, repair, and restore nested outages by pinging meters to validate power restoration of all customers affected.
  • Improved outage detection and management process where outage can be verified even without customer intervention. It supports real time outage events, which means when an outage happens to an AMI meter, the meter sends out the outage event to downstream systems, including NMS. So NMS is made aware of an outage reported by smart meters. When power is back and meter is powered up again, it sends a restoration event to NMS. These events with time-stamps make sure customers will not be charged during the outage window. NMS also has the ability to ping a meter to confirm power on at the utility side of the meter base, they are more informed when dealing with customers who have been disconnected for payment arrears.
  • Detection of outages at distribution transformers or other common points of failure can improve response times and reduce restoration costs. This is especially valuable in remote areas where the crew would normally have to spend a significant amount of time patrolling the grid to find the exact fault location.
  • Improved accuracy of distribution network reliability statistics by detecting outages in a timely manner.
  • Prioritizing restoration efforts and managing resources based on defined criteria such as the size of outages and the locations of critical facilities.
  • Validation of liability claims. Detection and recording of outages allows utilities to know which claims attributed to outages actually correlate to an outage and which do not.
7.6.1.6 LIMITATIONS OF NMS/OMS

Like any other systems, NMS or OMS has its own limitations. Utilities need to understand the limitations and prepare additional plans to cover the business process that NMS or OMS does not reach.

  • OMS does not “manage” the utility’s restoration. It is not a substitute for the utility’s emergency restoration plan (ERP).
  • OMS does not provide information about damage.
  • OMS does not directly provide estimated restoration times or other information that would be valuable to customers.
  • An OMS can become overwhelmed in extreme situations and may not be able to deliver promised benefits in all scenarios.

 

Average Monthly Total KW7.6.2 LOAD PROFILE

In electrical engineering, a load profile is a graph of the variation in the electrical load versus time. In real life, a load profile will vary according to customer types, temperature, and holiday seasons. Utilities use this information to plan how much electricity they will need to make available at any given time.

In an electricity distribution grid, the load profile of electricity usage is important to the efficiency and reliability of power transmission. The power transformer or battery-to-grid are critical aspects of power distribution; sizing and modelling of batteries or transformers depends on the load profile. The factory specification of transformers for the optimization of load losses versus no-load losses is dependent directly on the characteristics of the load profile, which the transformer is expected to be subjected to. This includes such characteristics as average load factor, diversity factor, utilization factor, and demand factor, which can all be calculated based on a given load profile.

 

7.6.2.1 LOAD PROFILE FOR UTILITIES

For utility companies with AMI, the data being collected by smart meters can be utilized in many ways. Depending on how the reading is set up, usage data could come in daily, hourly, or even every fifteen minutes or less.

It doesn’t matter whether the data is hosted onsite at utilities or offsite at the AMI metering companies. In order to make good use of this data, it must be correctly analyzed. This data can also be called load profile data. The concept of load profile is not new, and it has been available for many years on the high- end meters for commercial and industrial customers. With the implementation of AMI, now even residential customers can benefit from individual load profile to manage their power consumption more wisely.

 

7.6.2.2 LOAD PROFILE USE SCENARIO – RESIDENTIAL

Here’s a scenario for a regular residential customer:

Let’s say a customer is complaining that their electricity bill is way too high, and they are not using the amount of electricity the meter says they are. Their AMI watthour meter was setup to report on fifteen minute intervals. By pulling up their load profile data, the customer representative gets a graph of the usage every fifteen minutes of the day. First, look at the graph during times that the customers are sleeping to see if the load is constant. Spikes may occur during the night when the A/C comes on and off and when the water heater comes on and off. These regular spikes can be spotted right away. What takes more attention to discover is whether usage is constant overnight. If usage is constant, then compare it during the day and see if it goes off then. If it does not, then the customer needs to track it down and turn the device off. After all, the customer could be having a problem with an appliance that does not go off, or they kept something plugged which consumes much more electricity than expected.

 

7.6.2.3 LOAD PROFILE USE SCENARIO – COMMERCIAL AND INDUSTRIAL

Here’s a scenario for commercial and industrial customer:

A customer calls in and complains that their demand charge is way too high, and they want to know how they can lower it. In order to meet commercial and industrial customers’ complicated consumption needs, it requires the utility company to keep a vast array of expensive equipment – transformers, wires, substations, and even generating stations on constant standby. The amount and size of this equipment must be large enough to meet peak consumption periods, i.e., when the need for electricity is highest. Utilities and public service commissions around the country have determined that the most equitable way to cover the cost of this equipment is to have those customers who create this demand and the need for power during these peaks pay for its availability, which translates to a separate charge in their electricity bills. By examining the load profile data for that customer and showing them different spikes throughout the day, they may realize that the cause of high demand is due to coming in first thing in the morning and turning on their machines, lights, and A/C all at once. This naturally resulted in their demand being high, but only for a small amount of time throughout a working day. One of the things that the customer can do to reduce their demand is to stagger when they turn everything on.

 

7.6.3 GIS

To fully take advantage of the link between AMI and OMS, utilities are exploring opportunities to link the technologies with their supervisory control and data acquisition, customer information systems (CIS), IVR and GIS, all of which can generate additional useful information during outages. For instance, CIS and GIS are base data systems that feed into OMS. They help to determine where all the meters are and which customers are associated with which meters. This doesn’t help the OMS determine outages. However, as AMI data flows into the OMS, it includes a tag, such as the meter or premise ID, so the OMS knows which customer should be assigned the outage. GIS is then needed to analyze the locations of customers and determine work order solutions at different locations.

 

7.6.3.1 BENEFITS OF INTEGRATION WITH GIS

Further integration with GIS makes turns millions of service locations into a big picture.

  • GIS is widely used to optimize maintenance schedules and daily fleet movements. Typical implementations can result in a savings of 10-30% in operational expenses through reduction in fuel use and staff time, improved customer service, and more efficient scheduling. The cost of fuel and labor is reduced from greater efficiency.
  • GIS is the go-to technology for making better decisions about location. Common examples include real estate site selection, route/corridor selection, evacuation planning, conservation, and natural resource extraction. Making correct decisions about location is critical to the success of an organization.
  • GIS-based maps and visualizations greatly assist in understanding situations and in storytelling. They are a type of language that improves communication between different teams, departments, disciplines, professional fields, organizations, and the public.
  • Many organizations have a primary responsibility of maintaining authoritative records about the status and change of geography. GIS provides a strong framework for managing these types of records with full transaction support and reporting tools.
  • GIS is becoming essential to understanding what is happening and what will happen in geographic space. Once we understand, we can prescribe action. This new approach to management—managing geographically—is transforming the way organizations operate.

 

 

If you enjoyed this article, click here to start from the beginning of our Industry 101 Series.

 

Here is a list of relevant reading material our expert identified as sources for additional information:

www.learnmetering.com/pages/load-profile/
www.utilityproducts.com/articles/print/volume-8/issue-10/feature-stories/integration-of-advanced-metering-infrastructure-and-outage-management-system-reflects-smart-grid-goals.html
kubra.com/what-do-smart-meters-and-ami-mean-for-outage-communications/
en.wikipedia.org/wiki/Plug-in_electric_vehicles_in_the_United_Stateshttps://en.wikipedia.org/wiki/Electric_car#Politics
www.vox.com/2014/7/28/5944065/electric-cars-plug-in-vehicles-rising-sales-US
www1.eere.energy.gov/vehiclesandfuels/pdfs/1_million_electric_vehicles_rpt.pdf
www.nema.org/Storm-Disaster-Recovery/Smart-Grid-Solutions/Pages/Smart-Meters-Can-Reduce-Power-Outages-and-Restoration-Time.aspx
www.fsec.ucf.edu/en/publications/html/fsec-pf-369-02/
www9.nationalgridus.com/niagaramohawk/non_html/eff_elec-demand.pdf